shelby Flooring

Tongue & Groove Board

• Will NOT crack, splinter, or rot
• Rough surface for traction
• UV resistant
• Does NOT absorb moisture
• Extends the life of your trailer
• Increases resale value of trailer

Commonly Used In

• Horse/Livestock trailers
• Equipment trailers
• Truck bed flooring
• Livestock equipment
• Barn flooring
• Horse stall flooring
• Decks & Docks

General Specs

• Plank flooring comes in a variety of sizes from 4’ to 24’ in length.
• Flooring can be cut with a carbide blade
• Boards 10’ and shorter should be cut ¼” shorter to allow for thermal expansion
• Boards longer than 10’ should be cut ½” shorter to allow for thermal expansion
• Flooring should be anchored at a minimum of every 24” & at each end trailer flooring screws are recommended for anchoring
• Bracing for the floor should be minimum of every 12” a perpendicular angle iron brace of 2”x2”x3/16 is recommended
• 20-year warranty

Plank boards

• Will NOT crack, splinter, or rot
• Rough surface for traction
• UV resistant
• Boards can be spaced for drainage
• Does NOT absorb moisture
• Extends the life of your trailer
• Increases resale value of trailer

Commonly Used In

• Horse/Livestock trailers
• Equipment trailers
• Truck bed flooring
• Livestock equipment
• Dump bed side extensions
• Decks & Docks?

General Specs

• Plank flooring comes in a variety of sizes from 4’ to 24’ in length.
• Flooring can be cut with a carbide blade
• Boards 10’ and shorter should be cut ¼” shorter to allow for thermal expansion
• Boards longer than 10’ should be cut ½” shorter to allow for thermal expansion

Trailers Under 40 Ton

• Flooring should be anchored at a minimum of every 24” & at each end trailer flooring screws are recommended for anchoring
• Bracing for the floor should be minimum of every 12” a perpendicular angle iron brace of 2”x2”x3/16 is recommended
• 20-year warranty

Trailers Over 40 Ton

• Flooring should be anchored at a minimum of every 18” & at each end trailer flooring screws are recommended for anchoring
• Bracing for the floor should be minimum of every 9” a perpendicular angle iron brace of 2”x2”x3/16 is recommended
• 5-year warranty

Cleated Livestock LUG Flooring

• Will NOT crack, splinter, or rot
• Reduces animal stress
• Increases animal safety
• Boards can be spaced for drainage
• Does NOT absorb moisture
• Extends the life of your livestock trailer
• Increases resale value of livestock trailer
• 20-year warranty

Commonly Used In

• Livestock trailers
• Livestock equipment such as chutes, scales, ect.
• Anywhere livestock can benefit from a better floor

General Specs

• LUG flooring comes in a variety of sizes from 4’ to 24’ in length.
• Flooring can be cut with a carbide blade
• Flooring should be anchored at a minimum of every 24” & at each end trailer flooring screws are recommended for anchoring
• Bracing for the floor should be minimum of every 12” a perpendicular angle iron brace of 2”x2”x3/16 is recommended
• Boards 10’ and shorter should be cut ¼” shorter to allow for thermal expansion
• Boards longer than 10’ should be cut ½” shorter to allow for thermal expansion

Heavy Duty Wheel Chock

• Resistant to damage from UV, moisture, sale & oils
• Will NOT check, chip or dry rot
• Grooved bottom for better traction
• Mounting hole for rope or chain handles
• Lifetime warranty